COMPASS CYCLESは現在、日本語版Webサイトの制作を進めております。大部分のページは英語での表記に限定されておりますが、お支払い方法については日本語でご案内しております。ご不便をおかけいたしますが、何卒ご理解頂きますようよろしくお願い申し上げます。

  • en
  • fr
  • ja

Rene Herse Decaleur


The decaleur for the riding we enjoy: spirited adventures across mountain ranges that often involve rough roads. The Rene Herse decaleur holds the bag reliably, no matter how bumpy the terrain. It is designed to withstand 50,000+ miles of riding on all types of roads.

A decaleur attaches the handlebar bag securely, so it does not move around as you ride. It also keeps the bag clear of the handlebars, so you can use the tops’ hand position.

We licensed the locking design from C. S. Hirose and combined Rene Herse’s proven design to create a decaleur that is strong, light, reliable and elegant. Made by Nitto in Japan, the Rene Herse decaleurs are available in two versions: this one for Compass and classic Rene Herse stems, and a second for Nitto Pearl (NP) stems.

The decaleur consists of two parts: One attaches to the stem, the other to the bag. Pins on the bag attachment slide into the tubes on the stem attachment with a precise fit. A spring-loaded button locks the two parts together.

Note: The decaleur does not replace a rack. The bag needs to be supported securely from below. If the decaleur is used to support the weight of the bag, the pins will break off. (This is not covered under the warranty.)

Made in Japan under license from C. S. Hirose. 2 year warranty.



Too many decaleurs accidentally release their bags when the road gets bumpy. C. S. Hirose developed a simple locking mechanism that prevents this from happening. Push and hold the button to release the bag. Then simply pull the bag upward, attach your shoulder strap, and take it with you when you lock your bike. Installing the bag is equally simple: Slide the rear strap over the backstop of your rack. Push and hold the button, then insert the two pins on the bag attachment into the tubes on the stem mount. Once the bag is in place, release the button to lock the bag. No other attachments are needed, yet the bag is held securely.

Note: The decaleur does not replace a rack: the bag still needs to be supported from below.

  • Produced for Rene Herse Cycles by Nitto in Japan
  • Design licensed from C.S. Hirose
  • Spacing of handlebar bolts: 17 mm (c-c)
  • Spacing of vertical prongs on bag mount: 40 mm (c-c)
  • Spacing of holes for bag attachment: 200 mm center to center.
  • Weight (with bag attachment and bolts): 160 g