COMPASS CYCLESは現在、日本語版Webサイトの制作を進めております。大部分のページは英語での表記に限定されておりますが、お支払い方法については日本語でご案内しております。ご不便をおかけいたしますが、何卒ご理解頂きますようよろしくお願い申し上げます。

  • en
  • fr
  • ja

SKF Bottom Bracket – ISIS – 73 BB Shell


Tired of ISIS bottom brackets that last only a season or two? The larger ISIS spindle leaves less room for the bearings. Most high-end bottom brackets use pressed-in cartridge bearings with tiny balls that wear quickly. SKF designed their cartridge bottom bracket from the ground up to optimize strength and durability. The bearings run on races ground directly into the spindle and the shell, so SKF can use larger balls and rollers for optimum durability. For example, the non-drive-side balls measure 4.5 mm in diameter. To keep the bearings running smoothly, SKF designed and patented multi-stage seals that retain the grease and keep out water and dirt. Other modern cartridge bottom brackets, even the most expensive models, are relatively simple designs with exposed bearings that are separated from the elements only by rubber dust shields, which are not designed to keep out water. 10 year warranty includes the bearings.

商品カテゴリー: 商品タグ:

All parts of the SKF bottom brackets, including the bearings, are made from corrosion-free stainless steel and aluminum. Installation is simple, and requires only an ISIS-type bottom bracket tool. Do not use a “single-hook” bottom bracket wrench, as it can crack the hardened stainless steel of the BB shell. For 73 mm wide BB shells. Can be used with 68mm wide BB shell with 2.5mm spacer on the drive side (available separately). Mountain (BXC-600)

Freeride (BFR-600)

  • Reinforced spindle (smaller bolt hole)
  • 118 mm spindle
  • BSC threading
  • Red left cup (silver cups available separately)
  • Includes crank bolts

See Jan’s blog for more info: Bottom Brackets Demystified