![RH_1250 copy_wm080819](https://www.renehersecycles.com/wp-content/uploads/2015/05/RH_1250-copy_wm080819-600x600.jpg)
![](https://www.renehersecycles.com/wp-content/uploads/2015/05/RH_1247-copy_wm080819-600x600.jpg)
![](https://www.renehersecycles.com/wp-content/uploads/2015/05/bq_00514_wm_j-600x600.jpg)
![](https://www.renehersecycles.com/wp-content/uploads/2015/05/bq_00513_wm_j-600x600.jpg)
![RH_1250 copy_wm080819](https://www.renehersecycles.com/wp-content/uploads/2015/05/RH_1250-copy_wm080819-150x150.jpg)
![RH_1247 copy_wm080819](https://www.renehersecycles.com/wp-content/uploads/2015/05/RH_1247-copy_wm080819-150x150.jpg)
![bq_00514_wm_j](https://www.renehersecycles.com/wp-content/uploads/2015/05/bq_00514_wm_j.jpg)
![bq_00513_wm_j](https://www.renehersecycles.com/wp-content/uploads/2015/05/bq_00513_wm_j.jpg)
Rene Herse Fender Eyebolts
$20.00
Many of Rene Herse’s most coveted bikes used fender eyebolts with round heads and matching rounded cups: more elegant, lighter and (slightly) stronger than the large angular heads on current eyebolts.
We custom-made these eyebolts in three lengths: 7 mm (stay to fender connection), 11 mm (stay to unthreaded dropout connection), and 20 mm.
7 mm and 11 mm eyebolts sold in sets of 4.
20 mm eyebolts sold in pairs.
Pro Tip: The 20 mm eyebolts are extra-long and designed to be shortened to fit your application. Thread a nut onto the shaft before cutting off the bolt to restore the threads after cutting and filing.
- Technical Specs
- Round heads and small cups
- Stainless steel
- For 5 mm fender stays
- Shaft length: 7 mm, 11 mm, 20 mm
- 7 mm eyebolts are equipped with self-locking nuts for a tight grip on the inside of the fender
- 11 and 20 mm are equipped with standard nuts and washers to protect your bikes finish
- Made in Taiwan
Related products
-
Rene Herse Double Crank
$475.00 -
Rene Herse Triple Crank
$535.00 -
Rene Herse Straddle Cable Yoke
$38.00 – $45.00 -
Honjo R-Clamps
$9.00 -
Rene Herse Fender Stay
$24.00 – $30.00