![bq_00505_(c,s4)_wm_j](https://www.renehersecycles.com/wp-content/uploads/2021/04/bq_00505_cs4_wm_j-600x600.jpg)
![](https://www.renehersecycles.com/wp-content/uploads/2021/04/rene-herse_17235_wm_j-600x600.jpg)
![](https://www.renehersecycles.com/wp-content/uploads/2021/04/bq_00508_wm_j-600x600.jpg)
![](https://www.renehersecycles.com/wp-content/uploads/2021/04/bq_00509_wm_j-600x600.jpg)
![](https://www.renehersecycles.com/wp-content/uploads/2021/04/bq_00511_wm_j-600x600.jpg)
![](https://www.renehersecycles.com/wp-content/uploads/2021/04/bq_00512_wm_j-600x600.jpg)
![bq_00505_(c,s4)_wm_j](https://www.renehersecycles.com/wp-content/uploads/2021/04/bq_00505_cs4_wm_j.jpg)
![rene herse_17235_wm_j](https://www.renehersecycles.com/wp-content/uploads/2021/04/rene-herse_17235_wm_j-150x150.jpg)
![bq_00508_wm_j](https://www.renehersecycles.com/wp-content/uploads/2021/04/bq_00508_wm_j.jpg)
![bq_00509_wm_j](https://www.renehersecycles.com/wp-content/uploads/2021/04/bq_00509_wm_j.jpg)
![bq_00511_wm_j](https://www.renehersecycles.com/wp-content/uploads/2021/04/bq_00511_wm_j.jpg)
![bq_00512_wm_j](https://www.renehersecycles.com/wp-content/uploads/2021/04/bq_00512_wm_j.jpg)
Honjo Fork Crown Eyebolt Set (Daruma)
$9.00 – $12.00
Eyebolt (Daruma) for attaching the fender to the fork crown. The eyebolt goes over the brake bolt/rack bolt. It extends downward to provide an attachment point for the fender. Package contains 1 set of eyebolt/nut/washers.
Available in three lengths:
- 17 mm: for bikes with very short fork crowns
- 22 mm: for most cyclotouring/randonneur bikes (also for bikes with Rene Herse fork crown)
- 32 mm: extra-long, for unicrown forks; shorten to required length
- Technical Specs
- Includes:
- 5 mm eyebolt (Daruma) with M6 threads
- Large steel washer (goes against bottom of fork crown)
- Large leather washer (cushions fender against fork crown)
- Small washer (goes inside fender to spread the load)
- M6 locknut
- Length is measured from center of hole to end of threaded portion
- Thickness of all washers and locknut: 10.8 mm
- Made in Japan
Related products
-
Rene Herse Wire
$9.00 -
Honjo R-Clamps
$9.00