Rene Herse Taillight Braze-On
$14.00
If you are building a bicycle and want the option to add a Rene Herse Taillight, install this braze-on. The braze-on extends into the seat tube to prevent the seatpost from coming down too far and shearing off the wire. The mitered outer tube ensures the correct angle of the light.
The mount is made from CrMo. Since it’s threaded, there is plenty of pressure to maintain conductivity between taillight housing and braze-on/frame. We recommend a dab of conductive grease on the threads when mounting the taillight, just in case.
Pro Tip: Test-fit the taillight before installing the braze-on. If the light does not sit flush against the braze-on, drill out the first 1-2 millimeters of the threads.
- Technical Specs
- Cromoly steel
- Outer tube mitered for 72° seat tube angle
- M6 threading
- Made in Taiwan
Availability: In stock